Your Expert’s Guide to Fountain Hills Polyaspartic Floor Coats
Fountain Hills Epoxy flooring is a popular choice for garage floors and floors in industrial spaces. However, polyasparatic floor coatings offer many more advantages over epoxy and other traditional concrete floor coatings.
Polyaspartic is a type of polyurea, which itself is a subgroup of polyurethane. Polyurea is formed through the reaction of isocyanates and water or polyehteramines. A resin is mixed with a catalyst to harden, just like with epoxy. To make polyaspartic, an aliphatic polyisocyanate is mixed with an aliphatic diamine.
That’s a lot of technical explanation that not everyone may understand — or care about, frankly. What’s more important is knowing the benefits of Fountain Hills polyaspartic floor coatings for your home or business.
Faster Cure Rate
Polyaspartic floor coatings cure a bit slower than polyurea but much faster than epoxy — and both features are a benefit.
Polyurea can cure within five minutes, which can be too fast. The coating can harden before you make corrections. Meanwhile, epoxy can take so long to cure that you are unable to access your garage or work space for several days.
Polyaspartic cures between 5 and 120 minutes, depending on how it is formulated. That gives you more flexibility to meet the needs of the specific job. Even with multiple coats, your entire floor can be installed in just a day, allowing you to minimize down time.
Greater Temperature Range
Polyaspartic can be applied in more extreme temperatures than epoxy. Specifically, polyaspartic floor coatings can be applied when the temperature is as low as -30 degree Fahrenheit or as high as 140 degrees Fahrenheit.
Your floor is unlikely to reach temperatures that high, but it can easily reach those low temperatures if you live in a cold climate. That makes polyaspartic floor coatings a better choice for those climates. You won’t have to wait until the summer time to do the work you need. You can have the concrete floor coatings applied at any time of year.
Little to No VOCs
Volatile organic compounds can continue to create toxic fumes for a long time to come, which makes your working area a little less safe.
One of the many benefits of polyaspartic coatings is that they have little to no VOCs. You can work in the area with confidence, knowing that it is safe for you, your employees, and your clients.
These coatings are also better for the environment since they do not emit as many harmful chemicals.
When you are choosing the concrete floor coatings for your garage or work space, a top priority will be durability. You may be working with heavy duty tools in the area, and you will certainly have oil and other chemicals and fluids that will get on the floor.
Polyaspartic floor coatings stand up to the wear and tear that a lot of garage floors experience.
To start, polyaspartic has a high resistance to stains and chemical abrasions. That means that if you spill motor oil on the floor, the coating will not stain or the stain will not be as dark. If you accidentally spill some other caustic substance on the floor, the coating will not easily wear away or scratch.
Polyaspartic also has higher impact resistance, so it will not scratch as easily even if you drop heavy objects on it or drag things across the floor. It will maintain a smooth shine.
Polyaspartic also has a high tolerance to heat, so even if you come screeching in with hot tires, you won’t wear away the surface.
Polyaspartic floor coatings have a crystal clear and beautiful finish.
The finish will not be blushed by moisture that has been trapped in the concrete, and the UV stability of the finish means that it will not yellow.
Polyaspartic has a high gloss finish, so it will look shiny and gorgeous for years to come.
Things to Consider
Despite the many benefits of polyaspartic, there are some things you will need to consider before choosing it.
Typically, the cost of polyaspartic floor coatings will be a bit more than epoxy or other concrete floor coatings. The exact cost will depend on where you live in Arizona and the specific formulation you choose.
However, polyaspartic typically costs about $2 to $3 more per square foot than epoxy or other polyurethanes.
Polyaspartic coatings also must be installed by a Fountain Hills concrete floor coating professional. You can’t really DIY this job since it requires professional tools and experience to get just right. You also need at least two people for the job, so you’ll need a friend who also has the training and experience to do the work.
Polyaspartic is highly specialized, and any mistakes in the mixing of the materials or the application of the coating can make your floor vulnerable or create big flaws that will mar the beauty of the surface. It is well worth it to pay the extra money to have a professional install the floor coating and ensure that the floor is protected, that it looks beautiful, and that it will enjoy these benefits for years to come.
Barefoot Surfaces has been installing concrete floor coatings in homes and businesses in Fountain Hills and surrounding areas for many years. We apply polyaspartic floor coatings as well as metallic epoxies, decorative concrete overlays, and more. We work on garage floors, industrial floors and commercial floors, as well as providing patio epoxy floor coatings in Fountain Hills. We have the solutions you need to get beautiful and strong floors, thereby creating a safe working area that is also attractive and easy to clean. We use a proprietary process that incorporates five coatings for the ultimate in beauty and strength. Our floors are an investment that will only improve your property. Call us today to discuss the options for your concrete floor coatings and to get an estimate for your job.